Shopping Basket

Order before 10am for next working day delivery.  Subject to product availability locally, and vehicle delivery slots

Products Categories - Heat Reflecting Foil and Hybrid Insulation

Single Foil Laminate Radiant Barrier Insulation

YBS Foiltec Single & Double

Single foil can be used in cavity wall and ground floor under floor situationsFoil Insulation is designed to reflect infra-red energy out of a property in the summer, and back into the building in the winter. Single foil insulation is most suited for tropical climates, but can be used in temperate climates ... but their are risks. If not properly installed single foil insulation can condensate and lead to dry rot in wooden rafters and joists. For this reason we only recommend its use in Cavity-Wall, and Under-Ground-Floor applications.

Due to the limited choice of products and the limited applications for Single Foil Laminates, we have elected to support only one BBA Certified product, as shown below.

Foil-Tec is a BBA Certified multi-layer foil laminate,.The aluminium core is coated with nitro-cellulose to provide a corrosion resistant insulation system, which is less than one millimetre in thickness.

YBS Foiltec Single - with highly reflective aluminium foil one side

YBS Foiltec Double - with highly reflective aluminium foil on both sides

Please beware of over-engineered, over priced, Single Foil Laminates, or products without the appropriate certified performance statistics and approvals.


Insulating Fire Retardant Breather Venting Membrane for Timer Frame Construction

Breather Foil - Insulating, breathing wall protection

YBS Breather-Foil FR (Fire Retardant) Wall Membrane

Specially developed for use in timber-frame and modular building construction.

Breather-Foil FR can greatly increase the U Value of the timber-frame wall.

Whether pre-fabricated or assembled on site, Breather-Foil FR can afford the designer and contractor maximum flexibility when detailing timber-frame walls, without the expense of thicker timber frames or higher priced materials.

The Breather-Foil FR timber-framed wall system creates a wind-tight, draught-free, weather-sealed, yet vapour-permeable enclosure, when used in conjunction with external cladding, such as tile-hanging, masonry or weather-boarding.

The YBS FR Breather Foil timber-framed wall system creates a wind-tight, draught-free, weather-sealed, yet vapour-permeable enclosure, when used in conjunction with external cladding, such as tile-hanging, masonry or weather-boarding.

Whether pre-fabricated or assembled on site, YBS FR Breather Foil can afford the designer and contractor maximum flexibility when detailing timber-frame walls, without the expense of thicker timber frames or higher priced materials.


Bubble Foil Single / Double Heat Reflecting Membranes

YBS Airtec Single & Double Bubble Foil

Bubble-foil insulation, BBA certified single bubble, double bubbleBubble Foil Insulation is designed as a is a high performance insulation material that works by trapping air within its structure creating low emissivity (reflecting) air spaces, which enhance its total thermal capabilities.

We offer two Bubble Foil variations, multi-layer air bubble film insulation with aluminium bonded to one face, or to both outer faces.

YBS Airtec Single - multi-layer air bubble film insulation with aluminium bonded to one outer face

YBS Airtec Double - multi-layer air bubble film insulation with aluminium bonded to both outer faces

We recommend the use of single sided foils in simple applications where condensation is not a major consideration, such as green-houses, garden sheds, unheated garages, for example.

Bubble Foil Double is required for more robust applications such as Cavity Walls, External Wall Dry Lining systems and for Suspended Timber Floor applications.

Due to the potential of condensation being promoted in roof void applications, we only recommend their use by fully qualified building professionals.

Airtec is a BBA Certified multi-layer air bubble film insulation with aluminium bonded to either one face (Airtec-Single) or both faces (Airtec-Double).

The aluminium is coated to give durability and corrosion resistance therefore creating a fully waterproof insulation system.


Hybrid Radiant Barriers combined with alternative Insulation

Actis Hybris the totally new hybrid reflective foil insulation

Actis's exciting new innovative reflective insulation product, Hybris, is designed and manufactured on a honeycomb structure made of shaped polyethylene foams bonded to aluminium coated polyethylene foils.

Exceptional thermal performance is created by the special structure composed of a large number of low emissivity cavities, protected from dust and excessive air movement. Moreover, the low emissivity external
films provide additional thermal resistance, when associated with air cavities.
Hybris is available in rolls 1200mm wide and in a range of thickness’s from 30mm to 300mm every 15mm.

Hybris reflective insulation product, with its large number of low emissivity internal cavities resulting in a very high thermal performance, is available from 45mm to 300mm thick. Its low emissivity external films provide additional thermal resistance

Currently, the thickness’s of 75mm; 90mm; and 105mm are manufactured, with more thickness sizes to follow.


Actis HControl Hybrid - 45mm

New concept reflective breathable membrane with an excellent built-in thermal performance for use on the cold side of the building fabricActis's new HControl Hybrid insulation product is a reflective vapour control layer with a built-in thermal performance for use on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings

HControl Hybrid insulation provides dual performance within a single product : a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U Value. It can be used in conjunction with any type of insulation.

HControl Hybrid insulation is available in rolls of 1.6m x 6.25m = 10m², and 45mm thick.

Installed on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings, to enhance thermal values, and vapour and moisture control.


Actis Boost'R Hybrid - 35mm

New concept reflective breathable membrane with an excellent built-in thermal performance for use on the cold side of the building fabricActis Boost’R Hybrid is an entirely new concept - a reflective breathable membrane with an excellent built-in thermal performance for use on the cold side of the building fabric in roofs and walls.

It offers dual properties within a single product: A heat reflecting breathable membrane plus a thermal insulant that allows a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the required U Value. It can be used in conjunction with any type of insulation.

Boost’R Hybrid provides dual solutions combined within a single product ...

It can be used in conjunction with any type of insulation.

Boost-R Hybrid insulation is 35mm thick and available in rolls of 1.6m x 6.25m = 10m²

Installed on the warm side of any insulation material, behind the internal finish in roofs, walls and ceilings, to enhance thermal values, and vapour and moisture control


Heat Reflecting Membrane products from other Foil Insulation manufacturers

There are quite a number of suppliers of thermo foil products ... a great many of which are manufactured in the Far East. You will not find these items on this web site as it is our policy not to provide items without the appropriate certified performance statistics and approvals.

It is worth remembering that the foil lamination outer coatings have to have good reflective values. And, that the outside coating is not susceptible to tarnishing, which will render the product ineffective within a very short period of time.



Our Contact Details

www.just-insulation.com

27 Massetts Road, Horley, Surrey, RH6 7DQ

Telephone: 0333 9000 989

Facsimile: 0333 7000 797

Email: enquiries@just-insulation.com

Web presence: just-insulation.com

Web Sites

just-insulation.com

Minimum order £175.00 ex-VAT. Delivery vehicle sizes - flexible

insulation-online.com

Minimum order £500.00 ex-VAT. Delivery vehicles size - 28 tons+

just-rooflights.com

Solatube natural light sun pipes. Courier delivery from manufacturer