DuPont™ Tyvek Housewrap Building Control Membrane
Tyvek Housewrap is a high specification vapour permeable membrane mainly for timber frame wall applications, but it is also suitable for steel frame and concrete structures. The membrane should be surface applied, fixed directly to sheathing ply or blockwork.
Minimising the risk of condensation, while reducing heat losses
DuPont HouseWrap delivers the optimum balance of properties for superior performance against the elements. Housewrap helps prevent outside water from entering the walls and help to seal the home to keep outside air where it belongs.
HouseWrap helps reduce homeowner energy bills, due to homes staying cooler in the summer and warmer in the winter, and drier throughout the year.
High specification vapour-permeable membrane mainly for timber frame wall applications, but also suitable for steel-frame and concrete structures.
Drop-down price list / Add to shopping basket
Click to Buy: Tyvek Housewrap Breather Membrane for Timber Frame Walls
Procedure: Select products below to see pricing structure | Use product tick-boxes to select required products | Add to Basket
1 plus rolls @ £2.46 per m² = £184.76 (£221.71 inc-VAT) per roll
2 plus rolls @ £2.44 per m² = £183.12 (£219.74 inc-VAT) per roll
3 plus rolls @ £2.42 per m² = £181.49 (£217.79 inc-VAT) per roll
4 plus rolls @ £2.40 per m² = £179.85 (£215.82 inc-VAT) per roll
5 plus rolls @ £2.38 per m² = £178.22 (£213.86 inc-VAT) per roll
6 plus rolls @ £2.35 per m² = £176.58 (£211.90 inc-VAT) per roll
1 plus rolls @ £0.88 per m² = £123.09 (£147.71 inc-VAT) per roll
2 plus rolls @ £0.78 per m² = £109.72 (£131.66 inc-VAT) per roll
3 plus rolls @ £0.75 per m² = £104.68 (£125.62 inc-VAT) per roll
4 plus rolls @ £0.73 per m² = £101.73 (£122.08 inc-VAT) per roll
5 plus rolls @ £0.71 per m² = £99.62 (£119.54 inc-VAT) per roll
6 plus rolls @ £0.70 per m² = £97.92 (£117.50 inc-VAT) per roll
1 plus rolls @ £16.68 (£20.02 inc-VAT) per roll
5 plus rolls @ £16.50 (£19.80 inc-VAT) per roll
10 plus rolls @ £16.32 (£19.58 inc-VAT) per roll
15 plus rolls @ £16.14 (£19.37 inc-VAT) per roll
20 plus rolls @ £15.95 (£19.14 inc-VAT) per roll
25 plus rolls @ £15.77 (£18.92 inc-VAT) per roll
1 plus rolls @ £23.87 (£28.64 inc-VAT) per roll
5 plus rolls @ £23.61 (£28.33 inc-VAT) per roll
10 plus rolls @ £23.35 (£28.02 inc-VAT) per roll
15 plus rolls @ £23.09 (£27.71 inc-VAT) per roll
20 plus rolls @ £22.83 (£27.40 inc-VAT) per roll
25 plus rolls @ £22.57 (£27.08 inc-VAT) per roll
1 plus rolls @ £32.20 (£38.64 inc-VAT) per roll
5 plus rolls @ £31.85 (£38.22 inc-VAT) per roll
10 plus rolls @ £31.50 (£37.80 inc-VAT) per roll
15 plus rolls @ £31.15 (£37.38 inc-VAT) per roll
20 plus rolls @ £30.80 (£36.96 inc-VAT) per roll
25 plus rolls @ £30.45 (£36.54 inc-VAT) per roll
1 plus rolls @ £26.45 (£31.74 inc-VAT) per roll
5 plus rolls @ £26.17 (£31.40 inc-VAT) per roll
10 plus rolls @ £25.88 (£31.06 inc-VAT) per roll
15 plus rolls @ £25.59 (£30.71 inc-VAT) per roll
20 plus rolls @ £25.30 (£30.36 inc-VAT) per roll
25 plus rolls @ £25.02 (£30.02 inc-VAT) per roll
Product Applications Tyvek Housewrap is suitable for timber-frame constructions, either factory or site applied. In the absence of other guidance, suitable timber-frame constructions are defined as those designed and built in accordance with NHBC Standards, Section 6.2.
This product meets the NHBC requirements for minimum water penetration resistance and minimum tear resistance in any direction for sites defined as very severe exposure
- Composition - Spunbonded polyethylene
- Roll Size - 2.8m x 100m; - Weight 18kg; - Coverage 270m2
- Roll Size 1.4m x 100m; - Weight 9kg; - Coverage 130m2
- UV exposure 4 months Product
- Technical specifications surpass BS4016 requirements
- Membranes provide temporary weather protection during construction
- Materials are easy to apply, cut and form around details UKAS approved
The product resists liquid water penetration and wind-blown snow and will protect the sheathing and frame from external moisture.
The period prior to the installation of the brickwork should be kept to a minimum. The membranes should not be used as a temporary waterproof covering during this time.
Risk of condensation
The product has a design resistance to water vapour transmission of less than or equal to 0.6 MNsg–1 and is defined as a ‘breather membrane’ in accordance with BS 5250 : 2002. Therefore, it will contribute towards minimising the risk of interstitial condensation in suitably designed walls.
The risk of condensation occurring within the wall of a timber-frame building will depend upon the properties and vapour resistance of other materials used in the construction, the internal and external conditions and the effectiveness of the internal vapour control layer.
Convective water transfer into the wall construction can be reduced by installing a continuous airtight sheet such as Tyvek SD2 behind the internal lining. This may also contribute to a successful pressure test by achieving the required design air permeability of 10 m3h–1m–2 in accordance with Approved Document L (See section 12.3).
The product will resist the loads associated with construction and installation into timber-frame constructions.
The product is not adversely affected by water and will retain its properties when wet.
Properties in relation to fire
The product will have similar properties to polyolefin membranes in relation to fire, tending to burn and shrink away from the heat source. The product is unclassifiable in terms of the Building Regulations and this should be considered when assessing the overall fire risk.
Cavity barriers should be used to satisfy the requirements of the national Buildings Regulations.
As the product is confined within a wall construction it has suitable durability (see section 10), maintenance is not required.
The product will be virtually unaffected by the normal conditions found in a timber-frame wall and will have a life comparable with other similar elements of construction, eg vapour control layers.
Tyvek HouseWrap - Product Installation
Tyvek Housewrap must be installed in accordance with BBA Certificate No. 90/2548 instructions and the recommendations given in NHBC Standards, Section 6.2, where appropriate.
Starting 300 mm from a corner, wrap the Tyvek membrane completely around the external face of the sheathing board.
Make sure that the membrane overlaps the lowest timber member by 100 mm.
Normal practice is to unroll the membrane horizontally, but vertical application is also acceptable.
Fix the membrane with galvanised nails or stainless steel staples as follows:
Horizontal centres = max 600 mm
Vertical centres = max 300 mm Extend the Tyvek membrane to cover window and door openings and staple or nail around the openings at 150 mm centres.
Any vertical laps formed in the membrane should be a minimum of 150 mm.
Horizontal laps between sheets and any laps onto cavity trays or flashings should be a minimum of 100 mm.
Sealing the laps with Tyvek Tape is optional.
Once the Tyvek membrane installation is complete cut an ‘X’ from corner to corner at window and door openings, fold inwards and staple/nail to reveals.
Make good to the corners with Tyvek Tape. If windows and doors are already in place turn the membrane up against the frame to prevent water ingress.
Stud positions for wall ties can be easily marked by using an indelible marker pen.
Procedure for Lapping and jointing
The membrane should be fixed in such a way as to shed water away from the sheathing, and below the lowest timber. Upper layers should be lapped over lower layers.
Laps should be at least 100 mm and vertical laps 150 mm.
Vertical laps should be staggered wherever possible.
To assist in achieving the design air permeability the lap joints and penetrations through the underlay can be sealed with Tyvek Acrylic Tape or Tyvek Butyl Tape.
The membrane must be secured at regular intervals with nails and staples to prevent damage by wind
Nails should be of galvanized or sherardized mild steel, austenitic stainless steel, phosphor bronze or silicon bronze and staples should be of austenitic stainless steel.
Marking stud positions
It is essential that the positions of studs are marked to enable wall tie fixing.
It is essential that the lowest timbers in the wall are protected by the breather membrane.
Product Information and Certification
Links to manufacturer's information. Click to download in a separate browser window.
Dupont Tyvek Housewrap Datasheet | TyvekHousewrap BBA Certificate |
Priced on Application:
Generally, Products are readily available
Estimates for large quantity orders can be priced on application. Please contact us to discuss such matters.
Contact us directly for further information: Telephone 0333 9000 989 - Email: Click Here: